Use your address rather than a Front Range default.
Ask the contractor to state the design temperature and heating load for your Colorado property. A mountain home, a Western Slope home, and a Front Range home need their own assumptions. Have the bidder show the matched equipment’s output at that winter condition and the backup contribution.
If your immediate goal is cooling, still ask how the new system will operate during heating season. Define whether existing equipment remains and which rooms the proposed system covers. A statewide equipment label is not a substitute for that design.
Follow the Colorado program’s contractor and approval sequence.
Colorado Energy Office’s Home Energy Rebate instructions use registered program contractors, household eligibility screening, assessment, and approval of proposed upgrades before installation. The contractor applies an approved rebate to qualifying project cost.
Use the current program page and help center to confirm which pathway is accepting your property type and project now. Staged rollout notices and older income tables are not a household award. Obtain the actual approval and amount before counting a state rebate in the contract price.
Colorado Energy Office: Home Energy Rebate process · Source checked 2026-09-06
Keep local, utility, and state offers separate.
Give the installer the electric and gas utilities on your bills and your municipality. Ask them to identify the administrator, eligible measure, application sequence, and current funding for every proposed credit. A Denver-specific offer should not be applied to a home elsewhere.
If a contractor includes a tax-related discount, ask which current program authorizes it, who claims the credit, and what amount reaches you. Do not assume a contractor credit, household rebate, and financing offer are interchangeable or automatically additive. Verify the final combination with each administrator.
For the regional pathway, see our Denver-area heat-pump rebate guide and check its participating geography.
Compare the complete winter project.
| Question | Required detail |
|---|---|
| What is the house load? | Calculation for the property and planned improvements |
| What does the heat pump deliver? | Output table for the exact pairing |
| What covers the remainder? | Backup equipment and control logic |
| What changes in the house? | Ducts, electrical supply, indoor equipment |
| What is included outdoors? | Stand, drainage, snow and service access |
Ask the installer to account for the manufacturer’s installation requirements at your site. Include retained furnace or boiler maintenance in the annual ownership comparison.
Compare cash flow without assuming maximum rebates.
Show gross project cost, approved discounts, remaining upfront cost, and any financing terms separately. Have the bidder estimate electricity and retained-fuel use using your actual rates. Ask how more backup operation would change the bill.
Before work begins, keep the program approval, contractor participation confirmation, and equipment schedule together. At handover, collect the startup record, owner instructions, final certificate, and application receipt. If a substitute model or revised scope is proposed, have the administrator recheck eligibility first.
Bring a clear project brief to your installer.
Sources checked September 6, 2026. Confirm current funding and installation-date rules with the administrator before signing. These are selected local pathways, not an exhaustive rebate list.
Start a heating and cooling request with your existing equipment, utility, and comfort priorities. Temperaly does not approve rebates; a request is not an appointment.
Editorial review: 2026-09-06