Kansas heat pumps: size for summer, plan for winter.

Ask for both design days.

A Kansas heat-pump quote should explain how the system meets summer cooling needs and how it supplies heat in winter. Ask the contractor to list the outdoor conditions used for your address, the calculated house loads, and the selected equipment’s output.

For an eastern Kansas home with sticky rooms, request a moisture-control explanation. For a western Kansas home with exposed equipment, include placement and service access in the design discussion. These are prompts for a site-specific calculation, not a reason to buy a larger unit without one.

Evergy’s Kansas chart has fuel-specific eligibility.

Evergy’s 2026 Kansas air-source heat-pump schedule lists $500 at 15.2–15.99 SEER2, $700 at 16–16.99, $900 at 17–19.99, and $1,000 at 20 or above. The chart specifies replacement of an existing heat pump or electric-resistance heating arrangement, with AHRI-certified matched equipment.

A gas-furnace conversion is not automatically covered by that replacement category. Have an authorized contractor verify your existing heat, model pairing, and applicable tier. Use the Kansas chart for an Evergy Kansas account; similarly named Missouri programs can have different terms.

Evergy: 2026 Kansas rebate chart · Source checked 2026-09-06

Match the contractor to the program.

Evergy’s contractor finder identifies the residential rebate pathway as available to its Kansas customers. Use the finder before commissioning work and ask the contractor who submits the application and what evidence you receive.

If you are served by a municipal utility or cooperative, start with that provider instead. A Kansas City-area postal address does not establish the correct electric company or state program. Read the bill and have the installer name the utility program on the bid.

Evergy: authorized contractor finder · Source checked 2026-09-06

A larger rebate is not a sizing target.

First ask the designer to choose capacity and controls for the house. Then compare eligible models that fit the same design. Record the extra installed cost of a higher-efficiency tier alongside the extra confirmed rebate and projected energy difference.

For example, compare the upgrade price after its incremental rebate, not the entire equipment price against the full rebate. Ask whether the more expensive option changes indoor equipment, sound, maintenance, or backup operation. A claimed savings estimate should show your tariff and assumptions.

Keep the whole installation in the bid.

Request the indoor and outdoor units, thermostat, backup equipment, electrical work, duct corrections, stand, drainage plan, startup tests, and disposal as separate scope items. Have the contractor explain any reusable components and confirm they preserve the matched-system rating.

Before the final payment, obtain the AHRI certificate, recorded startup results, owner control instructions, and rebate submission receipt. If equipment availability forces a substitution, recheck the model pairing and incentive before installation.

Bring a clear project brief to your installer.

Sources checked September 6, 2026. Confirm current funding and installation-date rules with the administrator before signing. These are selected local pathways, not an exhaustive rebate list.

Start a heating and cooling request with your existing equipment, utility, and comfort priorities. Temperaly does not approve rebates; a request is not an appointment.